Chapter 2 Preparations
1.14
Backup Device
16x 2.5-inch Drive Model supports a magnetic tape drive and other backup devices.
1.14.1
Installation
Follow the steps below to install the backup device.
1. See steps 1 to 8 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Push the lever to unlatch the expansion bay, and remove the bracket toward the front of chassis.
3. Push the blank cover to remove it.
•
Use only the backup device specified by NEC.
Important
•
Available unit size is 3.5 inch (about 9 cm) in width, 1.6 inch (about 4 cm) in
height.
Important
Keep the removed blank cover for future use.
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
85