NEC Exress5800 Series User Manual page 143

Chapter 2 Preparations
(1)
Preparation
This server can be mounted to a rack made by NEC or other companies.
Check the rails in the following procedure before mounting the server to a rack.
Checking inner rails
Make sure the orientation of inner rails.
Installing inner rails
1. Mount an inner rail marked as "R" to the right side of the server and "L" to the left side when viewed the
server from front.
2. Align inner rail with three protrusions on side
of server chassis, and slide the inner rail
toward rear of the server.
Make sure the lock at around the center of
inner rail clicks to indicate the rail is surely
locked.
Install another inner rail to opposite side in
similar way.
Important Rail for left side has different shape from that for right side. Make sure the
orientation of rails to properly install them.
Inner rail (L)
Express5800/R120g-2E User's Guide
2. Installation and Connection
Inner rail (R)
143