Connecting To Uninterruptible Power Supply (Ups) - NEC Exress5800 Series User Manual

Chapter 2 Preparations
2.2.1

Connecting to Uninterruptible Power Supply (UPS)

To connect the power cord of the server to a UPS, use the connector output on the rear of the UPS. For details,
refer to the manual supplied with the UPS.
Example
Option slot
Input connector
(NEMA5-15P)
When the power cord is connected to a UPS, change the BIOS settings in order to link the server with the power
supply from the UPS.
To change the settings, select Server and then AC-LINK in BIOS Setup Utility, and change the displayed
parameters. Select Power On to perform automatic operations by using the UPS. For details, see Chapter 3 (2.
BIOS Setup Utility (SETUP)).
152
Universal Serial Bus (USB) port
Overload
protection reset
Computer interface port (COM)
Voltage sensitivity setting button
Express5800/R120g-2E User's Guide
2. Installation and Connection
Connector outputs
TVSS device connector