Removing Front Bezel - NEC Exress5800 Series User Manual

Chapter 2 Preparations
1.5

Removing Front Bezel

Remove Front Bezel when pressing POWER Switch or removing Top Cover.
1. Insert the attached Bezel Lock Key into the key slot and turn the key to the front bezel side while
pressing it lightly to release the lock.
2. Hold the left end of front bezel and pull the right end toward you about 10 cm. Check that the hook in left
is removed as illustrated in the figure below and remove the left end from the chassis.
3. Confirm that the left side of front bezel is unlocked, then hold the left end and pull it toward you to remove
the front bezel from chassis.
(1) Hold the
handle
46
(3) Pull the bezel
Hook
Views from above
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
Unlocked Locked
解除 ロック
(2) Pull and rotate about 10
degrees