Leds For Lan Connectors - NEC Exress5800 Series User Manual

Chapter 1 General Description
4.7.8

LEDs for LAN connectors

The LAN connectors on rear panel have LINK/ACT LED and SPEED LED.
LINK/ACT LED
• LINK/ACT LED (
This LED indicates the status of the LAN port.
LINK/ACT LED pattern
On (green)
Flashing (green)
Off
•
SPEED LED (
This LED indicates which network interface is used.
―The standard LAN ports (
―The management LAN port (
SPEED LED pattern
On (amber)
On (green)
Off
SPEED LED LINK/ACT LED
LINK/ACT
LED
Management
LAN LAN
LAN
connector connector
connector
1
SPEED
LED
1, 2, M)
The server is connected with network normally.
The server is accessing network.
The server is disconnected from network.
1, 2, M)
1 and 2) support 1000BASE-T, 100BASE-TX, and 10BASE-T.
M) supports 1000BASE-T, 100BASE-TX, and 10BASE-T.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
Express5800/R120g-2E User's Guide
SPEED LED
2
Description
Description
4. Names and Functions of Parts
37