Chapter 2 Preparations
7. Connect the SAS cable and SGPIO cable to the HDD cage and the Expander Card. See the figure
below.
HDD Backplane
8. Install Air Duct, Support Bar, and then install Top Cover.
9. Attach the ID label to the 2.5-inch HDD cage.
1.16.2
Removal
To remove an additional HDD cage, reverse the installation procedure above.
SAS cable
SGPIO cable
Note
Keep the removed blank cover for future use.
Important
To keep the cooling effect in the server, install the blank cover in the vacant slot.
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
RAID Controller
(PORTS_0-3)
RAID Controller
(PORTS_4-7)
Motherboard
(SGPIO)
99