Table of Contents
Advertisement
Chapter 3 Setup
7. The OS starts when POST is completed.
1.1.2
POST error messages
When POST detects an error, it displays an error message on the screen or beeps for some errors. For
descriptions of error messages, causes, and countermeasures, see Chapter 3 (1. POST Error Message)
in "Maintenance Guide".
Tips
When no bootable device is connected, the following message is displayed
by terminating POST.
Bootable media is not found.
Press <F2> to enter SETUP.
Press the <F2> key to boot the BIOS setup utility (SETUP).
Even when any bootable device is connected, the following message may
be displayed by stopping the utility.
Bootable media is not found.
Please restart this computer.
In this case, the BIOS setup utility (SETUP) cannot be booted.
Note
Take notes on the indication displayed on display unit before consulting with your
sales representative. Alarm messages are useful information for maintenance.
Express5800/R120g-2E User's Guide
1. Turning on the Server
157
Advertisement
Table of Contents
