Table of Contents
Advertisement
Chapter 2 Preparations
4. Secure the protective cover with six screws removed in Step 2.
5. Install Expander Card to Expansion Bay and secure it with eight screws provided with 2.5-inch HDD
cage.
6. Connect the power cable to the HDD cage and the Expander Card. See the figure below.
94
The connector of the power cable connected to the Expander Card is connected to the
Tips
motherboard at the position shown below. Remove the power cable connector from the
motherboard, and then connect it to the Expander Card.
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
