Huawei SmartLogger2000 User Manual page 100

SmartLogger2000-(10-C, 11-C)
User Manual
No. Parameter Description
6 Power When the power grid
quality is in strong
optimizatio adaptability mode, set
n mode Power quality
optimization mode to
Enable to optimize
the output current
harmonic of the
SUN2000.
7 PV module Specifies the type of
type PV modules.
Issue Draft A (2017-02-15)
Default
Unit
Value
N/A Disable
N/A Crystalline
silicon
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value Range Remarks
 Disable N/A
 Enable
 Crystalline  If PV module
silicon type is set to
Crystalline
 Film
silicon or Film,
 CPV 1
the SUN2000

CPV 2 will run properly
and will not shut
down if PV
modules are
shaded.
 If PV module
type is set to
CPV 1, the
SUN2000 can
restart quickly in
60 minutes if PV
modules are
shaded and the
input power
greatly
decreases.

If PV module
type is set to
CPV 2, the
SUN2000 can
restart quickly in
10 minutes if PV
modules are
shaded and the
input power
greatly
decreases.
7 WebUI
92