SmartLogger2000-(10-C, 11-C)
User Manual
Figure 3-8 Guide rail dimensions (unit: mm)
Procedure
Step 1 Remove the mounting ears from the SmartLogger using a Phillips screwdriver.
Issue Draft A (2017-02-15)
Verify that the length of the guide rail is sufficient for securing the SmartLogger. The
recommended length is 450 mm or greater. If an RS485 signal SPD needs to be installed
on the guide rail, the recommended guide rail length is 600 mm or greater.
Ensure that the guide rail is secured before installing the SmartLogger.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Device Installation
32