Setting Rs485 Parameters - Huawei SmartLogger2000 User Manual

SmartLogger2000-(10-C, 11-C)
User Manual
Figure 7-53 Setting Ethernet parameters
If the SmartLogger connects to the Internet through a router, note the following when setting
Ethernet parameters:




7.9.2.2 Setting RS485 Parameters

Because of permission restriction, log in as Advanced User. Choose Settings > RS485 to
access the target page.
Issue Draft A (2017-02-15)
Set the gateway address to the IP address of the router.
Ensure that the IP address of the SmartLogger is in the same network segment as the
gateway address.
Set the domain name server (DNS) address to the IP address of the router or obtain the
DNS address from the network provider.
If the IP address is changed, you need to use the new IP address to log in to the system.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
136