Program 33: Date & Time Program - Panasonic 5000 Series Operating Instructions Manual

Date & Time Program
Program 33: Date & Time Program
After the date and time are initially set at your workstations, you should not normally
need to make changes. An exception would be the change needed for the start and end of
Daylight Savings, where applicable. Use Program 33 to change either the date or the time
at a particular workstation.
1. With the keylock in MGR position, enter this sequence to select the Date & Time
program.
5
2. To change the date, enter the new date
3. Press CASH.
Note: Enter two digits for the Month, two digits for the Day, and two digits for the Year.
For example, January 2, 1994 = 010294.
[ date ]
4. To change the time at this workstation, enter the new time in hhmm format.
5. Press SBTL.
Note: Remember to use military time for afternoon and evening hours. For example, Noon
= 1200, 1:00 p.m. = 1300, 2:00 p.m. = 1400, 3:00 p.m. = 1500, 4:00 p.m. = 1600...
10:00 p.m. = 2200, 11:00 p.m. = 2300, Midnight = 0000.
[ time ]
6. Press CASH twice to return to the MGR Mode menu.
CASH
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
CASH 3
CASH
SBTL
CASH
3 CASH
MANAGER PROGRAMS
5-45