NEC 78K0 User Manual page 163

(2) 8-bit timer compare register 5n (CR5n)
CR5n can be read and written by an 8-bit memory manipulation instruction.
Except in PWM mode, the value set in CR5n is constantly compared with the 8-bit timer counter 5n (TM5n) count
value, and an interrupt request (INTTM5n) is generated if they match.
In PWM mode, when the TO5n pin becomes active due to a TM5n overflow and the values of TM5n and CR5n
match, the TO5n pin becomes inactive.
The value of CR5n can be set within 00H to FFH.
RESET input clears CR5n to 00H.
Figure 7-4. Format of 8-Bit Timer Compare Register 5n (CR5n)
Address: FF17H (CR50), FF41H (CR51)
Symbol
CR5n
(n = 0, 1)
Cautions 1. In the mode in which clear & start occurs on a match of TM5n and CR5n (TMC5n6 = 0), do
not write other values to CR5n during operation.
2. In PWM mode, make the CR5n rewrite period 3 count clocks of the count clock (clock
selected by TCL5n) or more.
Remark n = 0, 1
CHAPTER 7 8-BIT TIMER/EVENT COUNTERS 50 AND 51
After reset: 00H
User's Manual U16227EJ2V0UD
R/W
163