Setting Alarm Input And Output Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide

10.1 Setting Alarm Input and Output Parameters

Alarms can be linked by setting alarm input and output parameters.
Procedure
Step 1 Choose Settings > Alarm Configuration > Alarm I/O.
The page for Alarm I/O is displayed, as shown in
Figure 10-1 Alarm I/O tab page
Step 2 Set parameters. For detailed parameter description, see
Table 10-1 Parameter description
Parameter
Alarm input
Alarm output
Issue 01 (2016-08-20)
Device ID
Enable
Name
Type
Alarm check interval
Device ID
/
Name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Setting Alarm Parameters
Figure 10-1.
Table 10-1.
Description
ID of the alarm input device.
Indicates whether to enable
the alarm input function.
User-defined device name.
Select either Normal open
or Normal close based on
the device status.
Time interval at which the
system checks for new
alarms.
ID of the alarm output
device.
Manual control of the output
device status.
NOTE
This function cannot be used
with the alarm linkage
function. If the function is
used with the alarm linkage
function, the alarm linkage
actions will be affected.
User-defined device name.
139