Huawei IPC6125-WDL-FA Configuration Manual page 148

IPC6125-WDL-FA
Configuration Guide
Table 10-2 Alarm deployment types
Parameter
Video alarm deployment
Alarm input X deployment (Input1)
Step 3 Select an incident from the Incident type drop-down list box.
Step 4 Click Add Plan.
The page for adding a plan is displayed, as shown in
Figure 10-4 Add Plan tab page
Step 5 Set the start time, end time, and cyclic mode, and select weekdays.
Step 6 Click OK.
The Alarm Deployment Policy page is displayed.
Step 7 Click Save.
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Setting Alarm Parameters
Description
Indicates whether to generate an alarm
when a specified incident occurs. The
incidents include motion detection, lens
block, tripwire detection, intrusion
detection, loitering detection, abandoned
object detection, and removed object
detection.
l Enabled: When a specified incident
(specified in Incident type) occurs
during the alarm deployment time, an
alarm is generated.
l Disabled: When a specified incident
(specified in Incident type) occurs
during the alarm deployment time, no
alarm is generated.
l Enabled: When an Alarm input X
incident (specified in Incident type)
occurs during the alarm deployment
time, an alarm is generated.
l Disabled: When an Alarm input X
incident (specified in Incident type)
occurs during the alarm deployment
time, no alarm is generated.
Figure 10-4.
142