Huawei IPC6125-WDL-FA Configuration Manual page 173

IPC6125-WDL-FA
Configuration Guide
Table 14-3 Parameter description
Parameter
Storage
management
Platform offline
Cache
Continuous
recording
Issue 01 (2016-08-20)
No SD card
SD card status
Instant
formatting
SD card
refresh
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates there is no SD card on the IPC.
Displays the total capacity and occupied space of an
SD card.
Formats an SD card.
NOTE
l Before using an SD card, format it.
l Back up data before formatting an SD card.
l All data will be lost after an SD card is formatted.
Exercise caution when performing this operation.
l Do not remove an SD card when it is being formatted
or data-written.
l Format an SD card during off-peak hours.
Obtains the latest SD card status.
Video buffering: When cameras are disconnected
from the network, they can continue to shoot and
temporarily store video on their SD cards. When the
network is restored, the video surveillance platform
sends a video request to the cameras. The cameras
then send the video stored on the SD cards to the
video surveillance platform.This function is disabled
by default.
NOTE
When an IPC is not connected or cannot be connected to a
video surveillance platform for a long time, you are
advised to disable video buffering of the camera to
increase the service life of the SD card. To disable video
buffering, deselect Platform offline Cache.
Enables or disables the continuous video recording
function. The recorded video is stored in the SD
card.
NOTE
You can format the SD card when Continuous recording
is enabled.
14 Managing the System
167