Huawei IPC6125-WDL-FA Configuration Manual page 21

IPC6125-WDL-FA
Configuration Guide
Parameter
To Change the SDK
Password
Step 5 Click Save.
----End
Connection to the Platform Through Passive SDK Registration
If passive SDK registration is used when you set connection parameters on the platform, the corresponding
port number is 6060.
Step 1 Choose Settings > System Configuration > Platform Connection Parameters.
The page for setting platform connection parameters is displayed.
Step 2 In the SDK configuration area, select Enable.
Issue 01 (2016-08-20)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
NOTE
Change the SDK password to ensure security.
When the IPC uses the SDK protocol to connect to the video
surveillance platform, you must enter this password. Otherwise, the
connection cannot be set up. If platform authentication fails for
consecutively 5 times, the IPC is locked for 3 minutes. After you
change the password, keep the changed password safe.
1. In the SDK Password management area, enter
passwords in the Web user password, New password,
and Confirm password fields.
NOTE
– The default user name is admin, The value of Web user
password must be the same as the password of the current
user who logs in to the IPC web client.
– To improve security, the password must consist of 8 to 20
characters and contain at least two types of the following:
uppercase, lowercase, digits, and special characters.
– Weak passwords can be verified.The weak passwords include
"1qaz!QAZ", "admin123", "admin123!", "Admin123!",
"Administrator", "datacache1", "datacache2", "datacache3",
"datacache4", "datacache5", "dlsDb001", "dlsDls01",
"guest123", "HWbss123", "huawei123", "Huawei!@#",
"LcaP2010", "lcap_oracle", "lcap_uoa", "password1",
"password123", "PortalONE", "prmt_ideploy", "Promotion",
"SDP Report", "u+versioncode", and "Change_Me".
2. Click Save.
3 Setting Basic Parameters
15