IPC6125-WDL-FA
Configuration Guide
l Parameters to be set vary depending on protocols. IPCs can connect to the video surveillance platform
l This section describes how to set parameters on IPCs. For details about how to set parameters on the
3.2.1 Setting Parameters for an SDK-based Connection
When the SDK protocol is used when connecting IPCs to the platform, you need to set the
SDK parameters.
l Active registration: indicates that the IPC proactively initiates a registration request to the platform.
l Passive registration: indicates that the platform initiates a registration request to the IPC.
Connection to the Platform Through Active SDK Registration
Step 1 Choose Settings > System Configuration > Platform Connection Parameters.
The page for setting platform connection parameters is displayed.
Step 2 In the SDK configuration area, select Enable.
Step 3 Choose Active SDK registration in Protocol type.
Step 4 Set SDK parameters, as shown in
3-2.
Issue 01 (2016-08-20)
NOTE
successfully only when parameter setting is completed both on the video surveillance platform and IPCs.
video surveillance platform, see the corresponding documentation of the platform.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
3-2. For detailed parameter description, see
3 Setting Basic Parameters
Table
12