Huawei IPC6125-WDL-FA Configuration Manual page 93

IPC6125-WDL-FA
Configuration Guide
Table 7-4 Parameter description
Parameter
User name
Security
Authentication protocol
Authentication
password
Confirm password
Privacy protocol
Issue 01 (2016-08-20)
Description
User name for the NMS to visit the IPC. This parameter is set
on the IPC, which must be the same as that configured on the
NMS.
NOTE
l A user name consists of 5 to 16 characters.
l A user name contains characters including digits and case sensitive
letters.
Security level of user rights. The options are as follows:
l No security
Users are not allowed to view or modify IPC configurations.
l Authentication
Users can only view IPC configurations.
l Authentication and privacy
Users can view and modify IPC configurations.
This parameter is available only when you set Security to
Authentication or Authentication and privacy.
Protocol for user authentication.
This parameter is available only when you set Security to
Authentication or Authentication and privacy.
Password for user authentication.
NOTE
The password must meet the following requirements:
l The password consists of 8 to 20 characters.
l The password contains at least two types of the following:
lowercase letters (a to z), uppercase letters (A to Z), digits (0 to 9),
and special characters (including the space character and the
following: `~!@#$%^&*()-_=+\|[{}];:'",<.>/?).
l The password must be different from the user name or the reverse
text of the user name.
This parameter is available only when you set Security to
Authentication or Authentication and privacy.
Confirm password for user authentication.
This parameter is available only when you set Security to
Authentication and privacy.
Privacy protocol for user authentication.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Setting Network Parameters
87