Setting Image Overlay - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Step 2 Select advanced setting.
Step 3 Set Focusing Level.
Step 4 Use the mouse to adjust the position and size of the focusing region.
l A focusing region must have adequate texture details. Otherwise, it may not be focused to be seen clearly.
l You can select a preset mode to quickly set a focusing region. The focusing priority of a preset mode is
l Click Clear selection to reset the focusing region.
Step 5 Click Save.
----End

6.8 Setting Image Overlay

You can set image overlay to specify the position where the image is displayed.
Procedure
Step 1 Choose Settings > Channel Configuration > Image Overlay.
The page for setting image overlay is displayed, as shown in
Figure 6-11 Image Overlay tab page
Step 2 Click Browse and select an image.
l Only 24-bit BMP images are supported. The image transparency cannot be set.
l The image resolution ranges from 32 x 32 to 128 x 128. Both the image height and width must be a
Step 3 Click Upload.
Step 4 Select Overlay configuration.
Issue 01 (2016-08-20)
NOTE
10.
NOTE
multiple of 4.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Setting Video Parameters
Figure 6-11.
66