Setting Transparent Channel Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Parameter
Baud rate
Data bit
Stop bit
Parity check bit
Step 3 Click Save.
----End

8.1.2 Setting Transparent Channel Parameters

The transparent channel is a data transmission channel provided in the SDK protocol.
Prerequisites
The IPC is connected to an external PTZ, and the PTZ has been configured.
Procedure
Step 1 Choose Settings > PTZ Configuration > PTZ&Serial Port Parameters.
The PTZ&Serial Port Parameters page is displayed, as shown in
Figure 8-2 PTZ&Serial Port Parameters page
Issue 01 (2016-08-20)
Description
Communication rate, which must be the same as that of the
connected PTZ.
Actual number of data bits used for the communication.
Number of bits used for marking the end of the serial port data.
Method to check the serial port data.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Setting PTZ Control Parameters
Figure 8-2.
93