Setting Parameters For An Onvif-Based Connection - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Parameter
Stream index
Channel ID
Alarm input ID
Alarm output ID
Step 4 Click Save.
----End

3.2.3 Setting Parameters for an ONVIF-based Connection

When the ONVIF protocol is used when connecting IPCs to the platform, you need to set the
ONVIF parameters.
Context
l
l
Procedure
Step 1 Choose Settings > System Configuration > Platform Connection Parameters.
The page for setting platform connection parameters is displayed.
Step 2 Set ONVIF parameters, as shown in
3-4.
Issue 01 (2016-08-20)
The ONVIF protocol does not support H.265. First set the encoding protocol to H.264
and then set parameters on devices.
If the ONVIF protocol is used when you set connection parameters on the platform, the
corresponding port number is 80 or 8080. When connecting IPCs to the Milestone
platform, use port 8080 to prevent connection exceptions.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Index of the stream to be sent to the video surveillance
platform.
Lens ID.
Alarm input ID.
NOTICE
Alarm input ID that the platform allocates to the device based on the
device ID.
Alarm output ID.
NOTICE
Alarm output ID that the platform allocates to the device based on the
device ID.
Figure 3-5. For detailed parameter description, see
3 Setting Basic Parameters
Table
19