Setting Parameters For A Gb/T 28181-Based Connection - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Step 4 Click Save.
----End

3.2.2 Setting Parameters for a GB/T 28181-based Connection

When the GB/T 28181 protocol is used when connecting IPCs to the platform, you need to set
the GB/T 28181 parameters.
Context
l
l
Procedure
Step 1 Choose Settings > System Configuration > Platform Connection Parameters.
The page for setting platform connection parameters is displayed.
Step 2 Choose GB/T 28181 in Protocol type.
Step 3 Set GB/T 28181 parameters, as shown in
Table
Figure 3-4 GB/T 28181 parameters
Table 3-3 GB/T 28181 parameter description
Parameter
Platform IP
Issue 01 (2016-08-20)
The GB/T 28181 protocol does not support H.265. First set the encoding protocol to H.
264 and then set parameters on devices.
To connect the IPC to the video surveillance platform using the GB/T 28181 protocol,
set the connection parameters on the video surveillance platform and then on the IPC to
avoid connection failure.
3-3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-4. For detailed parameter description, see
Description
IP address of the video surveillance platform server.
3 Setting Basic Parameters
17