PTP 250 User Guide
Compliance with radio regulations
This section describes how the PTP 250 complies with the radio regulations that are in
force in various countries.
CAUTION
Regulatory constraints on radio operation
The Radio Regulations of various countries' constrain the operation of radio products
generally. In particular the local regulator may limit the amount of conducted or
radiated transmitter power and may require registration of the radio link.
Contact your supplier/installer to ensure that your product is configured to fulfill all
the local regulatory requirements, especially if you are intending to use a link with
external antennas.
Type approvals
This system has achieved Type Approval in various countries around the world. This
means that the system has been tested against various local technical regulations and
found to comply. The frequency bands in which the system operates may be
'unlicensed' and, in these bands, the system can be used provided it does not cause
interference. Further, it is not guaranteed protection against interference from other
products and installations.
CAUTION
When planning a link that will use Connectorized PTP 250 (with external
antennas), ensure that regulatory requirements are met for the installation, as
described in
phn-2182_002v000
May 2011
Changes or modifications not expressly approved by Motorola could void the
user's authority to operate the system.
Calculating EIRP for connectorized units
Compliance with radio regulations
on page 4-30.
4-27