Upgrading firmware version
Upgrading firmware version
Perform this task to ensure that the latest firmware version is installed on the unit.
This task consists of the following procedures:
x
Checking the installed firmware version
x
Saving the system configuration
x
Uploading a new firmware version
NOTE
Checking the installed firmware version
To check that the latest firmware version is installed, proceed as follows:
Select menu option Status. The System Status page is displayed. The
1
Version attribute near the top left is the installed firmware version
6-10).
2
Go to
updates. Check that the latest available firmware version (for example 250-
04-01) is the same as the one already installed.
3
If the unit needs to be upgraded to the latest firmware version, perform
Saving the system configuration
version
Figure 6-10 Firmware Version in System Status page
6-10
Ensure that the correct units are upgraded, as units cannot easily be
downgraded afterwards.
If the link is operational, ensure that the remote end of the link is upgraded
first using the wireless connection, and then the local end can be upgraded.
Otherwise, the remote end may not be accessible.
http://www.motorola.com/ptp/support
on page 6-12.
Chapter 6 Configuration and alignment
on page
6-10
on page
6-11
on page
6-12
and find Point-to-Point software
on page
6-11
and
Uploading a new firmware
(Figure
phn-2182_002v000
May 2011