Further Reading On The Poe Power Supply - Motorola PTP 250 User Manual

Power over Ethernet injector (PoE power supply)

Further reading on the PoE power supply

For more information on the PoE power supply, refer to the following:
x
Power supply selection
power supply.
x
Installation inventories
installations, including PoE power supply units, with Motorola part numbers.
x
Power supply unit specifications
power supply (and the PIDU) such as dimensions, weight, environmental and
electrical requirements.
x
Connecting to the unit
supply to a management PC to allow configuration and alignment of the PTP 250.
x
Installing the PoE power supply
power supply, connect it to the ODU, and prepare the network cables.
x
Connecting to the network
supply to the network when configuration, installation and alignment are
complete.
x
Testing link end hardware
used when testing the link end hardware for suspected faults.
1-12
on page 2-4 describes how to select a location for the PoE
on page 4-2 lists the components required for PTP 250
on page 4-12
on page 6-3 describes how to connect the PoE power
on page 5-27
on page 6-35 describes how to connect the PoE power
on page 8-2 describes how the PoE power supply is
Chapter 1 Product description
contains specifications of the PoE
describes how to install the PoE
phn-2182_002v000
May 2011