Table of Contents
Advertisement
Web-based management
Table 7-4 System Status LAN attributes
Attribute
IP Address
Network Mask
MAC Address
Link
Speed
Duplex
7-10
Meaning
Internet protocol (IP) address. The factory default is
169.254.1.1, but it may be reset in the Installation Wizard; see
Step 1: LAN configuration
Defines the address range of the connected IP network. The
factory default is 255.255.0.0, but it may be reset in the
Installation Wizard; see
15.
MAC address of the Ethernet LAN port of this unit. This is not
user-configurable.
The current status of the Ethernet link. A state of 'Up' with a
green background indicates that an Ethernet link is
established. Any status on a yellow background indicates that
the Ethernet link is not established.
The negotiated speed (Mbps) of the Ethernet interface.
Indicates whether the unit is transmitting data in full duplex
or half duplex mode. Full duplex is expected in normal
operation.
on page 6-15.
Step 1: LAN configuration
phn-2182_002v000
Chapter 7 Operation
on page
6-
May 2011
Advertisement
Table of Contents
