PTP 250 User Guide
Using the diagnostics plotter
The Diagnostics Plotter page is used to plot key performance statistics against time.
To plot diagnostics, proceed as follows:
Select menu option Diagnostics Plotter. The Diagnostics Plotter page is
1
displayed
Use the Diagnostics Selector drop-down list to select a diagnostic type to
2
plot.
3
Use the Trace Selection to select traces of the maximum, mean or minimum
values of the diagnostic type. Maximum values are displayed in blue, mean
values are displayed in
Figure 7-11 Diagnostic Plotter page
phn-2182_002v000
May 2011
(Figure
7-11).
red
and minimum values are displayed in green.
Managing performance
7-21