PTP 250 User Guide
Saving the system configuration
To save the current configuration before upgrading to a new firmware version,
proceed as follows:
1
Select menu option System, Configuration, Save And Restore. The Save
and Restore page is displayed
2
Select Save Configuration File.
3
Save the configuration file to a PC hard drive.
The configuration file format is:
mm-mm-mm-mm-mm-mm_iii-iii-iii-iii.cfg
Figure 6-11 Save & Restore page
phn-2182_002v000
May 2011
Where:
mm-mm-mm-mm-mm-mm
iii-iii-iii-iii
(Figure
6-11).
Is:
Upgrading firmware version
MAC address of unit
IP address of unit.
6-11