NEC Express5800 series User Manual page 100

SCSI BIOS ~ SCSI Select ~
The SCSISelect utility is provided to configure the SCSI controller on the system board (or the
SCSI controller on an optional board). This utility may be started with a simple key operation
while POST is in progress and requires no specific start-up disk.
Using SCSI Select Utility
Use the SCSISelect utility mainly to set the transfer speed of connected SCSI devices. The
SCSI devices include those installed in the 5.25-inch device bays and backup devices, such as
an external DAT and MO, but not hard disks.
IMPORTANT:
controller basis with a utility. The server contains one SCSI controller.
When you added optional SCSI controllers, you need to make
configuration for each SCSI controller in addition to the standard
internal SCSI controller. Some additional SCSI controllers may
require a different utility to make changes to the configuration.
Configuring SCSI Controller on Mother Board
The following describes configuration for the SCSI controller on the system board of the
server.
IMPORTANT:
utility. Dialog boxes appear on your SETUP utility, thus, may differ
from descriptions in this User ' s Guide. If you find anything unclear,
see the online help or ask your sales representative.
90 Setting Up Your Storage Server
SCSI configuration must be made on a per-SCSI
The server contains the latest version of the SCSI Select