NEC Express5800 series User Manual page 131

Hide thumbs Also See for Express5800 series:
Table of Contents

Advertisement

You will be prompted to reboot the system to make the changes permanent. Select
Cancel for now, as you will be instructed to reboot the system later, after further
modifications have been made.
This will return you to the Network Setup window.
Changing the Administrator Password
To change the Administrator Password; from the Network Setup window, select
Change Administrator Password.
Then change the password, by clicking in the New Password field. Enter your new
password and confirm by re- entering the same password, in the Confirm New
Password field.
Click OK at the bottom right hand corner of the screen to apply the change. You will be
retuned to the Network Setup window.
Note
prompted to Login again. To continue this session in the web UI, type your
new password in the Password field.
CAUTION: If you change the user name and password, be certain that you
keep an appropriate record of the change. If you forget and cannot locate the
new user name and password, neither you nor Maxtor Technical Support will
be able to administer your NEC Storage NS420.
Setting Time & Date
The last step is to set the date, time and time- zone for your NEC Storage NS420. Select
Maintenance from the blue navigation bar at the top of the web UI.
Next, select Date and Time.
Enter the correct year, month, date, time and time- zone by clicking on the down arrow
button in each field and highlighting the appropriate entry.
Note
this by clicking OK
SNMP Service
If you plan to manage your NEC Storage NS420 with ESMPRO, you need to configure
the SNMP Service.
SNMP Service in NEC Storage NS420 is installed but not configured.
To configure the SNMP service
1. On the primary menu bar, select Maintenance.
2. Click on Terminal Services
3. Follow the prompts and enter your User name and Password.
4. Right-Click on the Computer Icon and select Manage on the menu displayed
: Since you changed your Administrator Password, you will now be
: Even if the correct date and time are displayed, you must verify
Configuring Your System 121

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storage ns420

Table of Contents