NEC Express5800 series User Manual page 26

STANDARD FEATURES
High performance

Intel Xeon Processor
High-speed network interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access
(Ultra320 SCSI)
High-speed memory access (168-pin,
72-bit ECC registered DDR DIMM
(DDR-266 compatible)
High-reliability
Memory monitoring feature (single-bit
error correction/multiple-bit error
detection)
CPU/memory degradation feature (logical
isolation of a failed device)
Memory chipkill feature
Bus parity error detection
Temperature detection
Error notification
Internal fan monitoring feature
Internal voltage monitoring feature
Redundant power supply (hot-swap)
Auto-rebuild feature (optional,
hot-swappable)
BIOS password feature
Mechanical security lock
Management Utilities
NEC ESMPRO
NEC Management Workstation
Application (NEC MWA)
Maintenance Features
Off-line Maintenance Utility
Memory dump feature using the DUMP
switch
16 System Overview
Expandability
Three full-length, full-height 64-bit/100
MHz PCI-X riser slots and three low
profile 64-bit/100 MHz riser slots
Large memory of up to 6 GB
Seven hot-swap SCSI hard disk drive
bays
Up to two multi-processors are available
for upgrade.
One backup file bay
Flex bay
USB interface (A USB-support driver is
required.)
Two network ports
Many Available Features
Graphic accelerator "RAGE XL" support
El Torito Bootable CD-ROM (no emulation
mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-Link feature
Baseboard Management Controller
(BMC)
Consoleless feature
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Easy and Fine Setup
NEC STORAGE NS420 (system setup
utility)
Configuration Parameter Diskette Creator
SETUP (BIOS setup utility)
SCSI Select (SCSI device utility)