NEC Express5800 series User Manual page 107

Submenu item
Sync Transfer Rate
(MB/Sec)
Initiate Wide
Negotiation
Enable Disconnection
Send Start Unit
Command
Enable Write Back
Cache
BIOS Multiple LUN
Support
Include in BIOS Scan
Advanced Configuration Options
Move the cursor onto "Advanced Configuration Options" and press Enter to display
the following submenu.
Reset SCSI Bus at IC Initialization.................................................................. Enabled
Display <Ctrl><A> Message During BIOS Initialization ................................... Enabled
Extended BIOS Translation for DOS Driver > 1 GByte.................................... Enabled
Verbose/Silent Mode....................................................................................... Verbose
Options Listed Below Have NO EFFECT if MULTI LUN Support Is
Disabled
Host Adapter BIOS ......................................................................................... Enabled
Domain Validation .......................................................................................... Enabled
Support Removable Disks Under BIOS as Fixed Disks ................................... Disabled
BIOS Support for Bootable CD-ROM............................................................... Enabled
BIOS Support for Int13 Extensions................................................................. Enabled
Parameter Description
[160] 20.0 Select [160] as a recommended.
80.0 16.0 You may need to change the value depending
on your optional device.
53.4 13.4
Refer to the manual that comes with your
40.0 10.0
optional device.
32.0 ASYN
26.8
[Yes] Select "Yes" if your SCSI device supports the
Wide SCSI interface. Select "No" if not.
No
[Yes] Select "Yes".
No
[Yes] Select "Yes" to send the command to the hard
disk. Otherwise select "No".
No
Yes Select "N/C".
No
[N/C]
Yes Select "No".
[No]
[Yes] Select "Yes".
No
Advanced Configuration Options
[ ]: Factory-set
Setting Up Your Storage Server 97