NEC Express5800 series User Manual page 74

Boot
To change the boot order of devices connected to the server
Select [Boot] and specify the boot order.
To display POST check results
Select [Boot] - [Quiet Boot] - [Disabled].
You can also press Esc while the log is on the screen to display POST check results.
To use remote wake-up feature
Via Modem:
Select [Advanced] - [Advanced Chipset Control] - [Wake on Ring] - [Enabled].
Via LAN:
Select [Advanced] - [Advanced Chipset Control] - [Wake on LAN] - [Enabled].
Via PCI device:
Select [Advanced] - [Advanced Chipset Control] - [Wake on PME] - [Enabled].
Via RTC alarm:
Select [Advanced] - [Advanced Chipset Control] - [Wake on RTC Alarm] - [Enabled].
To control from the HW console
Select [Boot] - [Quiet Boot] - [Disabled].
Select [Server] - [Console Redirection] and set each item.
64 Setting Up Your Storage Server