NEC Express5800 series User Manual page 146

Power on the server, start the SETUP utility, select [Boot] → [Hard Disk], and set the
10.
boot priority in the submenu.
This operation is necessary because installing an additional hard disk drive clears the
current setting of the boot priority.
IMPORTANT:
To add a hard disk during operation of the Global Array Manager
(GAM), click the Scan Device key after about 90 seconds have
passed from the installation of the hard disk. If you click the Scan
Device key after executing the Expand Array, the added disk
appears correctly.
If a hard disk is added to the server operating in RAID1 by using the
expand array feature, the RAID is automatically changed to
RAID0+1. (However, it is not possible to set RAID0+1 directly by
using a specific utility.)
Install the front bezel you removed in step 2.
11.
There are tabs on the left side of the front bezel. Engage the tabs with the server frame,
install the front bezel, and lock it with the security key.
136 Upgrading Your NEC Storage
Frame
Tabs
1
2