NEC Express5800 series User Manual page 70

When you install the server for the first time or install/remove optional devices, thoroughly
read this chapter for a better understanding BIOS setup requirements.
SYSTEM BIOS ~ SETUP ~
The BIOS SETUP utility allows you to make basic hardware configuration changes to the
server. This utility is pre-installed in the flash memory of the server and is ready to run at
system startup.
Your server is factory-configured with the correct BIOS parameter settings. These settings are
referred to as the "default settings." Normally, you won't need to make changes to the BIOS
default settings.
IMPORTANT:
The SETUP utility is intended for system administrator use only.
Incorrect settings of BIOS parameters could make your server
inoperable.
The SETUP utility allows you to set a password. The server is
provided with two levels of passwords: Administrator and User.
With the Administrator password, you can view and change all
system parameters of the SETUP utility. With the User password,
system parameters available for viewing and changing are limited.
Do not set any passwords before installing the operating system.
Your server contains the latest version of the BIOS SETUP utility.
Dialog boxes appear in your SETUP utility, thus, may differ from
descriptions in this User ' s Guide. If you find anything unclear, see
the online help or ask your sales representative.
60 Setting Up Your Storage Server