HP MSR2003 Configuration Manual page 142

Figure 47 Network diagram
Source
10.110.5.100/24
Table 11 Interface and IP address assignment
Device
Router A
Router A
Router A
Router B
Router B
Router C
Router C
Configuration procedure
1. Assign an IP address and subnet mask to each interface according to
shown.)
2. Configure OSPF on the routers in the PIM-SSM domain to make sure the following conditions are
met: (Details not shown.)
The routers are interoperable at the network layer.
GE2/1/1 GE2/1/4
GE2/1/3
Router D
PIM-SSM
Interface IP address
GigabitEthernet
10.110.1.1/24
2/1/1
GigabitEthernet
192.168.1.1/24
2/1/2
GigabitEthernet
192.168.9.1/24
2/1/3
GigabitEthernet
10.110.2.1/24
2/1/1
GigabitEthernet
192.168.2.1/24
2/1/2
GigabitEthernet
10.110.2.2/24
2/1/1
GigabitEthernet
192.168.3.1/24
2/1/2
Router A
GE2/1/1
GE2/1/3
GE2/1/3
GE2/1/2
GE2/1/2
GE2/1/1
Router E
GE2/1/2
GE2/1/1
Router C
Device
Router D
Router D
Router D
Router E
Router E
Router E
Router E
132
Receiver
Host A
Host B
Receiver
GE2/1/1
Router B
Host C
Host D
Interface
GigabitEthernet
2/1/1
GigabitEthernet
2/1/2
GigabitEthernet
2/1/3
GigabitEthernet
2/1/1
GigabitEthernet
2/1/2
GigabitEthernet
2/1/3
GigabitEthernet
2/1/4
Figure
IP address
10.110.5.1/24
192.168.1.2/24
192.168.4.2/24
192.168.3.2/24
192.168.2.2/24
192.168.9.2/24
192.168.4.1/24
47. (Details not