HP MSR2003 Configuration Manual page 338

[RouterD] ipv6 multicast routing
[RouterD-mrib6] quit
# Enable MLD on GigabitEthernet 2/1/1 (the interface that connects to the receiver host).
[RouterD] interface gigabitethernet 2/1/1
[RouterD-GigabitEthernet2/1/1] mld enable
[RouterD-GigabitEthernet2/1/1] quit
# Enable IPv6 PIM-SM on the other interfaces.
[RouterD] interface gigabitethernet 2/1/2
[RouterD-GigabitEthernet2/1/2] ipv6 pim sm
[RouterD-GigabitEthernet2/1/2] quit
[RouterD] interface gigabitethernet 2/1/3
[RouterD-GigabitEthernet2/1/3] ipv6 pim sm
[RouterD-GigabitEthernet2/1/3] quit
# Enable IPv6 BIDIR-PIM.
[RouterD] ipv6 pim
[RouterD-pim6] bidir-pim enable
[RouterD-pim6] quit
4. On Router C, configure Serial 2/1 as the C-BSR, and Loopback 0 as the C-RP for the entire IPv6
BIDIR-PIM domain.
[RouterC-pim6] c-bsr 2002::2
[RouterC-pim6] c-rp 6001::1 bidir
[RouterC-pim6] quit
Verifying the configuration
1. Display the DF information of BIDIR-PIM:
# Display the DF information of IPv6 BIDIR-PIM on Router A.
[RouterA] display ipv6 pim df-info
RP address: 6001::1
Interface
GE2/1/1
GE2/1/2
# Display the DF information of IPv6 BIDIR-PIM on Router B.
[RouterB] display ipv6 pim df-info
RP address: 6001::1
Interface
GE2/1/1
GE2/1/2
GE2/1/3
# Display the DF information of IPv6 BIDIR-PIM on Router C.
[RouterC] display ipv6 pim df-info
RP address: 6001::1
Interface
State DF-Pref
Win 100
Lose 100
State DF-Pref
Win 100
Win 100
Lose 0
State DF-Pref
328
DF-Metric DF-Uptime DF-Address
2 01:08:50
1 01:07:49
DF-Metric DF-Uptime DF-Address
1 01:24:09
1 01:24:09
0 01:23:12
DF-Metric DF-Uptime DF-Address
FE80::200:5EFF:
FE71:2800 (local)
FE80::20F:E2FF:
FE38:4E01
FE80::200:5EFF:
FE71:2801 (local)
FE80::20F:E2FF:
FE38:4E01 (local)
FE80::20F:E2FF:
FE15:5601