Task
Display brief information about
MSDP peers.
Display detailed information about
the MSDP peer status.
Display information about the (S,
G) entries in the SA message
cache.
Display the number of (S, G)
entries in the SA message cache.
Reset the TCP connection with an
MSDP peer and clear statistics for
the MSDP peer.
Clear (S, G) entries in the SA
message cache.
Clear statistics for an MSDP peer
without resetting the TCP
connection with the MSDP peer.
MSDP configuration examples
This section provides examples of configuring MSDP on routers.
PIM-SM inter-domain multicast configuration
Network requirements
As shown in
PIM-SM domain has at least one multicast source or receiver.
Set up MSDP peering relationships between the RPs in the PIM-SM domains to share multicast source
information among the PIM-SM domains.
Command
display msdp [ vpn-instance vpn-instance-name ] brief [ state { connect |
disabled | established | listen | shutdown } ]
display msdp [ vpn-instance vpn-instance-name ] peer-status
[ peer-address ]
display msdp [ vpn-instance vpn-instance-name ] sa-cache
[ group-address | source-address | as-number ] *
display msdp [ vpn-instance vpn-instance-name ] sa-count [ as-number ]
reset msdp [ vpn-instance vpn-instance-name ] peer [ peer-address ]
reset msdp [ vpn-instance vpn-instance-name ] sa-cache [ group-address ]
reset msdp [ vpn-instance vpn-instance-name ] statistics [ peer-address ]
Figure
52, OSPF runs within AS 100 and AS 200 and BGP runs between them. Each
151