Displaying And Maintaining Mld Snooping - HP MSR2003 Configuration Manual

Step
3. Enable the IPv6 multicast group
replacement function globally.
To enable the IPv6 multicast group replacement on a port:
Step
1. Enter system view.
2. Enter Layer 2 Ethernet interface
view.
3. Enable the IPv6 multicast group
replacement function on the
port.

Displaying and maintaining MLD snooping

Execute display commands in any view and reset commands in user view.
Task
Display information about Layer 2 IPv6
multicast groups (MSR2000/MSR3000).
Display information about Layer 2 IPv6
multicast groups (MSR4000).
Display information about Layer 2 IPv6
multicast forwarding entries
(MSR2000/MSR3000).
Display information about Layer 2 IPv6
multicast forwarding entries (MSR4000).
Display information about Layer 2 IPv6 MAC
multicast groups (MSR2000/MSR3000).
Display information about Layer 2 IPv6 MAC
multicast groups (MSR4000).
Display information about Layer 2 IPv6 MAC
multicast forwarding entries
(MSR2000/MSR3000).
Display information about Layer 2 IPv6 MAC
multicast forwarding entries (MSR4000).
Display MLD snooping status.
Display information about dynamic MLD
snooping forwarding entries
(MSR2000/MSR3000).
Display information about dynamic MLD
snooping forwarding entries (MSR4000).
Command
overflow-replace [ vlan vlan-list ]
Command
system-view
interface interface-type
interface-number
mld-snooping overflow-replace
[ vlan vlan-list ]
Command
display ipv6 l2-multicast ip [ group ipv6-group-address |
source ipv6-source-address ] * [ vlan vlan-id ]
display ipv6 l2-multicast ip [ group ipv6-group-address |
source ipv6-source-address ] * [ vlan vlan-id ] [ slot slot-number ]
display ipv6 l2-multicast ip forwarding [ group
ipv6-group-address | source ipv6-source-address ] * [ vlan
vlan-id ]
display ipv6 l2-multicast ip forwarding [ group
ipv6-group-address | source ipv6-source-address ] * [ vlan
vlan-id ] [ slot slot-number ]
display ipv6 l2-multicast mac [ mac-address ] [ vlan vlan-id ]
display ipv6 l2-multicast mac [ mac-address ] [ vlan vlan-id ]
[ slot slot-number ]
display ipv6 l2-multicast mac forwarding [ mac-address ] [ vlan
vlan-id ]
display ipv6 l2-multicast mac forwarding [ mac-address ] [ vlan
vlan-id ] [ slot slot-number ]
display mld-snooping [ global | vlan vlan-id ]
display mld-snooping group [ ipv6-group-address |
ipv6-source-address ] * [ vlan vlan-id ] [ verbose ]
display mld-snooping group [ ipv6-group-address |
ipv6-source-address ] * [ vlan vlan-id ] [ verbose ] [ slot
slot-number ]
235
Remarks
By default, the IPv6 multicast group
replacement function is disabled.
Remarks
N/A
N/A
By default, the IPv6 multicast group
replacement function is disabled.