HP MSR2003 Configuration Manual page 324

Figure 97 Network diagram
Table 21 Interface and IPv6 address assignment
Device
Router A
Router A
Router B
Router B
Router C
Configuration procedure
1. Assign an IPv6 address and prefix length to each interface according to
shown.)
2. Configure OSPFv3 on the routers in the IPv6 PIM-DM domain to make sure the following conditions
are met: (Details not shown.)
The routers are interoperable at the network layer.
The routers can dynamically update their routing information.
3. Enable IPv6 multicast routing, MLD, and IPv6 PIM-DM:
# On Router A, enable IPv6 multicast routing.
<RouterA> system-view
[RouterA] ipv6 multicast routing
[RouterA-mrib6] quit
# Enable MLD on GigabitEthernet 2/1/1 (the interface that connects to the stub network).
[RouterA] interface gigabitethernet 2/1/1
Interface
GigabitEthernet 2/1/1
GigabitEthernet 2/1/2
GigabitEthernet 2/1/1
GigabitEthernet 2/1/2
GigabitEthernet 2/1/1
IPv6 address Device
1001::1/64 Router C
1002::1/64 Router D
2001::1/64 Router D
2002::1/64 Router D
2001::2/64 Router D
314
Interface
GigabitEthernet 2/1/2
GigabitEthernet 2/1/1
GigabitEthernet 2/1/2
GigabitEthernet 2/1/3
GigabitEthernet 2/1/4
Figure
IPv6
address
3001::1/64
4001::1/64
1002::2/64
2002::2/64
3001::2/64
97. (Details not