Msdp Configuration Task List; Configuring Basic Msdp Functions; Configuration Prerequisites; Enabling Msdp - HP MSR2003 Configuration Manual

RFC 3446, Anycast Rendezvous Point (RP) mechanism using Protocol Independent Multicast (PIM)
•
and Multicast Source Discovery Protocol (MSDP)

MSDP configuration task list

Task at a glance
Configuring basic MSDP
•
(Required.)
•
(Required.)
•
(Optional.)
Configuring an MSDP peering
•
(Optional.)
•
(Optional.)
•
(Optional.)
Configuring SA message related
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)

Configuring basic MSDP functions

All the configuration tasks in this section should be performed on RPs in PIM-SM domains, and each of
these RPs acts as an MSDP peer.

Configuration prerequisites

Before you configure basic MSDP functions, complete the following tasks:
Configure a unicast routing protocol so that all devices in the domain are interoperable at the
•
network layer.
Configure PIM-SM to enable intra-domain multicast.
•

Enabling MSDP

Step
1. Enter system view.
2. Enable IP multicast routing and
enter MRIB view.
3. Return to system view.
4. Enable MSDP and enter MSDP
view.
functions:
Enabling MSDP
Creating an MSDP peering connection
Configuring a static RPF peer
connection:
Configuring the description for an MSDP peer
Configuring an MSDP mesh group
Controlling MSDP peering connections
parameters:
Configuring SA message contents
Configuring SA request messages
Configuring SA message filtering rules
Configuring the SA message cache
Command
system-view
multicast routing [ vpn-instance
vpn-instance-name ]
quit
msdp [ vpn-instance
vpn-instance-name ]
144
Remarks
N/A
By default, IP multicast routing is
disabled.
N/A
By default, MSDP is disabled.