Ipv6 Pim-Ssm Configuration Example - HP MSR2003 Configuration Manual

# Display information about the DF for IPv6 multicast forwarding on Router D.
[RouterD] display ipv6 multicast forwarding df-info
Total 1 RP, 1 matched
00001. RP address: 6001::1
Flags: 0x0
Uptime: 00:05:12
RPF interface: GigabitEthernet2/1/3
List of 2 DF interfaces:

IPv6 PIM-SSM configuration example

Network requirements
As shown in
The receivers receive VOD information through multicast. The receiver groups of different
•
organizations form stub networks, and one or more receiver hosts exist in each stub network. The
entire IPv6 PIM domain operates in the SSM mode.
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
•
• The SSM group range is FF3E::/64.
MLDv2 runs between Router A and N1 and between Router B, Router C, and N2.
•
Figure 101 Network diagram
2: GigabitEthernet2/1/2
1: GigabitEthernet2/1/1
2: GigabitEthernet2/1/2
Figure 101:
330