NEC Express5800 series User Manual page 147

Error Code and Message
02F5 DMA Test Failure
02F6 Software NMI failed
02F7 Fail-safe Timer NMI
Error
0611 IDE Configuration
Error
0612 IDE configuration
error-device
0613 COM A configuration
error
0614 COM A configuration
error
0615 COM B configuration
error
0616 COM B configuration
error
0617 Floppy Configuration
Error
0618 Floppy Configuration
Error
0619 Parallel port
configuration error.
061A Parallel port
configuration error.
0B00 Rebooted during
BIOS boot at Post
Code
0B01 Rebooted during OS
boot
0B02 Rebooted during OS
Runtime
0B1B PCI System Error
0B1C PCI Parity Error
0B22 Processor Error
Description
DMA Test Failed
Software NMI failed
Fail-safe Timer NMI failed
IDE Configuration changed.
IDE configuration error-device
COM A configuration changed
COM A configuration error –
device disabled.
COM B configuration changed
COM B configuration error –
device disabled.
Floppy Configuration changed.
Floppy Configuration Error –
device disabled.
Parallel port configuration
changed
Parallel port device disabled
Rebooted during BIOS boot at
Post Code
Rebooted during OS boot
Rebooted during OS Runtime
PCI System Error on
Bus/Device/Function
PCI Parity Error on
Bus/Device/Function
Processors are installed out of
order
Action
Contact your service representative.
Contact your service representative.
Contact your service representative.
Contact your service representative.
Contact your service representative.
Contact your service representative.
Contact your service representative.
Contact your service representative.
Contact your service representative.
Replace the CPU.
Problem Solving 5-15