Hot-plug PCI Control Submenu
Option
Reserving memory
space for PHP
Empty Bus Default
Speed
Empty Bus Default Speed Submenu
Option
PCI Slot 5-6
PCI Slot 7-8
Embedded SCSI/Embedded NIC/Embedded Video Controller Submenu
Option
SCSI Controller
LAN Controller 1
LAN Controller 2
Video Controller
Option ROM Scan*
* Only displayed for SCSI and LAN controllers
Parameter
Disabled (None)
Minimum 6 (2+4) MB
Middle 48 (16+32) MB
Maximum 96 (32+64) MB
-
Parameter
PCI 33MHz
PCI 66MHz
PCI-X 66MHz
PCI-X 100MHz
Parameter
Enabled
Disabled
Enabled
Disabled
Description
Determines memory space at
every empty slot for PHP (PCI
Hot-plug).
Refer to Empty Bus Default
Speed submenu.
Description
Selects the type (PCI or PCI-X)
of PCI board and frequency of
the board to be installed into
PCI slots 5 – 6 or 7 – 8.
The parameter must be
selected before installing the
hot plug PCI board. (This option
is ignored and the appropriate
installed board parameter is
applied to the slot by the
system after installing the board
and rebooting the system.).
Description
Indicates whether the on-board
controller is enabled or
disabled.
Displays the submenu for
indicating whether the
expansion of BIOS of on-board
controller is enabled or
disabled.
Configuring Your System 3-10
Your Setting
Your Setting
Your Setting