Exiting Adaptec Scsi Utility; Configuring Optional Scsi Controller Boards - NEC Express5800 series User Manual

Extended BIOS Translation for DOS
Drives >1 GByte
Verbose/Silent Mode
Host Adapter BIOS (Configuration Utility
Reserves BIOS Space)
Domain Validation
Support Removable Disks
Under BIOS as Fixed Disks
BIOS Support for Int13 Extensions
1
No effect if BIOS is disabled.
2
Do not remove media from a removable media drive if it is under BIOS control.

Exiting Adaptec SCSI Utility

To exit the Adaptec SCSI Utility, press ESC until a message prompts you to exit
(if you changed any settings, you are prompted to save the changes before you
exit).

Configuring Optional SCSI Controller Boards

To configure SCSI devices connected to optional SCSI controller boards, use
the SCSI BIOS utility provided with the specific option board.
When installing multiple SCSI controller boards, refer to subsection "Option
ROM Submenu" and set the parameter to "Enabled" for the specific PCI slot
being used (PCI slot #1 – PCI slot #8). The server first displays the start-up
message of the SCSISelect utility for the on-board SCSI controller and then it
displays the utility start-up message for each additional SCSI controller.
Enabled
Verbose
1
Enabled
1
Enabled
1, 2
Disabled
1
Enabled
Configuring Your System 3-23