Security Menu - NEC Express5800 series User Manual

Security Menu

Option
User Password is
Supervisor Password is
Set User Password
Set Supervisor Password
Password on boot
Parameter
Clear
Clear
Press ENTER
Press ENTER
Disabled
Enabled
Description
Status only, user cannot
modify. Once set, this can be
disabled by setting it to a null
string, or by clearing
password jumper on system
board (see System Board
Jumpers in this Chapter).
Status only, user cannot
modify. Once set, this can be
disabled by setting it to a null
string, or by clearing
password jumper on system
board (see System Board
Jumpers in this Chapter).
When the <Enter> key is
pressed, the user is prompted
for a password (up to 7
alphanumeric characters);
press ESC key to abort. Once
set, this can be disabled by
setting it to a null string, or by
clearing password jumper on
system board (refer to
System Board Jumpers in this
chapter).
With a user password,
accessible SETUP menus are
restricted. This feature is
available only if the
Supervisor Password is
specified.
Supervisor password (up to 7
alphanumeric characters)
controls access to the setup
utility.
When the <Enter> key is
pressed, the user is prompted
for a password; press ESC
key to abort. Once set, this
can be disabled by setting it
to a null string, or by clearing
password jumper on system
board (refer to System Board
Jumpers in this chapter).
This feature is available only
when you logged in the
SETUP utility with the
supervisor password.
Specifies whether the
passwords are entered or not
on booting. At first the
supervisor password must be
set.
Configuring Your System 3-14
Your Setting