Primary Ide Master/Primary Ide Slave Submenu - NEC Express5800 series User Manual

Primary IDE Master/Primary IDE Slave Submenu

Option
Type
Cylinders
Heads
Sectors
Maximum
Capacity
Multi-Sector
Transfers
LBA Mode Control
32 Bit I/O
Transfer Mode
Ultra DMA Mode
*1 Selectable only when the Type is set to "User"
*2 Displayed only when the Type is set to "User"
*3 Displayed only when the Type is set to "Auto"
Parameter Description
Auto
Set the IDE device to be the
None
master. The selection of "Auto"
CD-ROM
causes the device to be detected
IDE Removable
automatically during execution of
ATAPI Removable
POST.
Other ATAPI User
"None" disables the connected
device.
1-2048 Indicates the number of cylinders
(display only).
1-16 Indicates the number of
read/write heads (display only).
*1, *2
1-64 Indicates the number of sectors
on each track (display only).
- Indicates the drive capacity
(display only).
Disabled
Indicates the status of multi-
2 Sectors sector transfer controlled by
4 Sectors BIOS.
8 Sectors
16 Sectors
Disabled Indicates the status of the LBA
Enabled (Logical Block Access) controlled
by BIOS.
Disabled
Specifies whether the 32-bit IDE
Enabled data transfer is enabled or
disabled.
Standard
Indicates the data transfer mode
Fast PIO 1 between drives controlled by
Fast PIO 2 BIOS.
Fast PIO 3
Fast PIO 4
FPIO 3/DMA 1
FPIO 4/DMA 4
Disabled Indicates the Ultra-DMA mode of
Mode 0 data transfer between drives
Mode 1 controlled by BIOS.
Mode 2
Mode 3
Mode 4
*1, *2
*1, *2
*2
*3
*3
*3
*3
Configuring Your System 3-7
Your Setting