Siemens SINUMERIK 828D Function Manual page 120

Detailed description
2.8 Technology cycles
Execution sequence of technology cycles
If several technology cycles are programmed in the action part of a synchronized action, they
are executed in the sequence from left to right.
Example:
Call of three technology cycles in the action part of a synchronized action
Program code
ID=1 <condition part> DO AXIS_X AXIS_Y AXIS_Z
Execution sequence of the technology cycle blocks:
Note
Supplementary conditions
• A maximum of eight technology cycles may be called in the action part of a synchronized
• Except for the call of further technology cycles, no other action may be programmed in
See also
Processing mode (ICYCON, ICYCOF) (Page 121)
120
action.
the action part of a synchronized action in which a technology cycle is called.
, , , , ,
N10 N11 N12 N20 N21
Function Manual, 07/2012, 6FC5397-5BP40-3BA0
, , ,
N22 N30 N31 N32
Synchronized actions