Siemens SINUMERIK 828D Function Manual page 61

Settable addresses: Couplings > Generic coupling
CPON
CPSETTYPE
CPSYNCOP
CPSYNCOP2
CPSYNFIP
CPSYNFIP2
CPSYNCOV
CPSYNFIV
1) Section: "Couplings (CP..., LEAD..., TRAIL..., CTAB...) (Page 105)"
Table 2- 5
G functions: Set measuring system
G70
G71
G700
G710
1) Section: "Setting the measuring system (G70, G71, G700, G710) (Page 87)"
Table 2- 6
Predefined subprograms: Miscellaneous
POLFA
POLFC
STOPREOF
RDISABLE
DELDTG
LOCK
UNLOCK
RESET
ICYCON
ICYCOF
SYNFCT
FTOC
SOFTENDSA
PROTA
Synchronized actions
Function Manual, 07/2012, 6FC5397-5BP40-3BA0
2.5 Language elements for synchronized actions and technology cycles
Activation of the coupling to all defined leading axes
Define basic coupling properties
Position synchronism "coarse"
Position synchronism 2 "coarse"
Position synchronism "fine"
Position synchronism 2 "fine"
Velocity synchronism "coarse"
Velocity synchronism "fine"
1)
Inch measuring system
Metric measuring system
Inch measuring system
Metric measuring system
Axial retraction position for single axis
Axial retraction position for channel axes
Cancel preprocessing stop
Section: "Cancel preprocessing stop (STOPREOF) (Page 80)"
Read-in disable
Programmed read-in disable (RDISABLE) (Page 78)"
Delete distance-to-go
Section: "Delete distance-to-go (DELDTG) (Page 81)"
Lock synchronized action
Unlock synchronized action
Reset technology cycle
Technology cycle: One block per interpolation cycle
Technology cycle: All blocks in one interpolation cycle
Evaluate polynomial function
Section: "Polynomial evaluation (SYNFCT) (Page 69)"
Tool fine compensation
Section: "Online tool offset (FTOC) (Page 76)"
Software limit switch
Change status of a protection zone
1)
Detailed description
61